DELTA 20-619 6-Inch Drill Press Vise

If you want a drill press vise that is safe, and accurate, you will want the DELTA 20-619 6-Inch Drill Press Vise. It has a quick release that makes adjusting to different sizes easy, by using a tightening screw. The vise includes cast iron construction, and you can mount it onto a drill press table.

Technical Details

* Drill press vise clamps workpieces up to six inches wide
* Jaws come predrilled for auxiliary jaw plates
* Quick-release clamp allow for quick set up
* Heavy-duty cast iron construction
* Slots make it easy to mount to drill press tables


Product Dimensions: 11.2 x 9.2 x 5 inches ; 18 pounds


The DELTA 20-619 6-Inch Drill Press Vise can be a great addition to your shop. If you have a small bench top drill press, this may not be the product for you. Here is some information you can use to find out if the vise will work well with what you have.

9-3/4" Long x 8-7/8" Wide. Bottom is 1-5/8" over the drill press table

The jaws are 1-1/2" High x 5-7/8" Wide

Wood blocks on the jaws are what you would normally want and two 1/4" holes that are spaced at 3-5/8" will be able to hold it.

A 30 degree five tooth nut segment will be able to engage the screw for the quick release

The pivot is positioned so that when tightened the threads on the nut will dig into the screw. You will be able to turn the nut away from the screw, so you can slide the jaw. If you are not using it, you will be able to push the screw when the nut is down and the jaw will gear forward easily.